In fiber optic communication,10G
Optical Ethernet interface technology lately continues to be
considerable development, However, because of the expensive, 10-Gbps
application doesn't, as projected on the market spread rapidly. 10-Gbps
technology according to copper wire is also suffering from low port
density issues due to the energy loss and crosstalk, causing its
market-oriented process difficult. Within this context, the emergence of
your new program. Solutions with high port density, low-cost SFP +
optical transceivers for enterprise users to supply more cost-effective
technology previously 10-Gbps Ethernet upgrade.
As SFP+ (enhanced small form-factor pluggable) gets to be more
pervasive,we would like to realize it more and more easy.Just like its
name implies, the SFP+ transceiver is an upgraded form of the small
form-factor pluggable transceiver. The SFP+ Transceiver
is more compact in dimensions than its predecessors, X2, XENPAK and
XFP, which makes it the right solution for higher port density
installations. Fiberstore give you the SFP+ transceivers are also not
merely efficient, but cost effective, using a power consumption of less
than 1W.
The SFP+ module can be a variant of the SFP optical transceiver. The
SFP+ module form factor is 30% smaller, uses less power, requires fewer
components, and it is less than the 10-Gigabit small form-factor
pluggable module (XFP) form factor, that was already smaller and used
less power compared to XAUI-based XENPAK and X2 form factors.
The SFP+ form factor significantly simplifies the functionality of the
10G optical module by moving such functions as clock and data recovery
(CDR), electronic dispersion compensation (EDC), 10G SERDES, and signal
conditioning that traditionally resided in the XAUI-based modules into
10GbE PHY devices and line cards. Because of this, the modules are
smaller, consume less power, and allow increased port density while
being less than XFP. Some products on the market now provide 48 ports or
maybe more inside a rack.
Each SFP+ module houses an optical transmitter and receiver. One end
with the module is surely an SERDES framer interface (SFI) serial
interconnect, which handles differential signals approximately 10
Gbits/s. One other end is surely an optical connection that matches the
10GbE and 8GFC standards. The SFP+ active cable has electrical input and
outputs by having an optical transmitter and receiver internal to the
cable. Active cables with SFP+ terminations also can be copper-based
with integrated pre-emphasis and equalization.
SFP+ or SFP + transceivers are used for very fast 10Gigabit Ethernet,
linking the gear to fiber optic networks. This products include active
SFP+ cables and SFP+ transceivers. Addititionally there is copper SFP+
offered by Cisco. SFP+ is by far the littlest size 10G transceiver; it's
much lighter weight reducing power consumption compared with former 10G
transceivers X2 and XENPAK. The Cisco 10GBASE SFP+ modules offer
customers numerous 10 Gigabit Ethernet connectivity selections for data
center, enterprise wiring closet, and repair provider transport
applications.SFP+ module is a next-generation transceiver module per the
ANSI T11 Group for 8.5 Gbps and 10Gbps Fiber Channel and Ethernet
applications.
FiberStore manufactures complete selection of compatible fiber transceivers,
such us SFP+ (SFP +) transceiver, X2 transceiver, XENPAK transceiver,
XFP transceiver, SFP (Mini GBIC) transceiver and GBIC transceiver,
CWDM/DWDM transceiver, PON transceiver, and compatible Cisco, HP,
Juniper, Nortel, Force10, D-link, 3Com, and backed by way of a lifetime
warranty.Choose the fiber optic transceivers in fiberstore.com with
confidence.
2013年1月30日星期三
The Hot-swappable And Protocol-independent For XFP Transceiver
What exactly is XFP transceiver principle ? Fiberstore XFP module is
hot-swappable and protocol-independent. XFP (10 Gigabit Small Form
Factor Pluggable) can be a standard for transceivers for high-speed
computer network and telecommunication links which use optical fiber.
They sometimes operate at near-infrared wavelengths (colors) of 850 nm,
1310 nm or 1550 nm. Principal applications include 10 Gigabit Ethernet,
10 Gbit/s Fibre Channel, Synchronous optical networking (SONET) at
OC-192 rates, Synchronous optical networking STM-64, 10 Gbit/s Optical
Transport Network (OTN) OTU-2, and parallel optics links. They can
operate over a single wavelength or use dense wavelength-division
multiplexing techniques.Juniper XFP is one of the famous xfp transceiver brand.
The XFP transceiver will be the smallest X module, to a certain degree as it removed a lot of electronics, the cost of the transfer towards the host line card. Interestingly, in accordance with the design, XFP supports data rates of telecommunications protocols, that makes it an Ethernet packet routing platforms and SONET / SDH, Resilient Packet Ring (RPR) ideal interface module.
XFP transceivers commercially ready available in the market now include the the SR, LR, ER and ZR.XFP SR working distance is 300 meters max, it really works with OM3 10GB multimode optical fiber. The other 3 types use single mode fiber, XFP LR max distance is 10km, XFP ER is 40km, and XFP ZR max working span is 80km via SMF.
To learn the XFP transceiver,you must learn what's 10G XFP transceiver? 10G XFP transceiver can be a small form factor hot pluggable module made for 10G network applications including 10Gig Ethernet and fiber channel.XFP transceiver is really a high performance, affordable modules for serial optical data communications applications specified for signal rates of 10.30 Gb/s to 11.3 Gb/s. It's fully compliant to XFP MSA Rev 4.5. The modules are prepared for single mode fiber and operates with a nominal wavelength of 850/1310/1550 nm. XFP transceivers modules comply with the XFP multi source agreement put together by several leading companies in this industry.
10G XFP transceivers are made based on based on the multi source agreement (MSA) and has lightweight and most economic prices in comparison with its former 10g transceivers. The transmitter section incorporates uncooled directly modulated 1310 nm distributed feedback laser (DFB) or EML colled laser 1550nm. The receiver section uses PIN photodetector for low dark current and ideal responsivity or APD high sensetivity receiver. Typical 10g XFP on the market include SR, LR, ER, ZR versions.
Fiberstore supply XFP MM 300m, XFP 10km, XFP 20km, XFP 40km, XFP 80km(10GBase-zr xfp 80km), XFP 120km, CWDM XFP, DWDM XFP, WDM XFP, BiDi XFP, single fiber XFP, and number of compatible XFP transceivers for example Cisco XFP, 3Com XFP, Juniper XFP, Foundry XFP, Extreme XFP, Dell XFP, Finisar XFP plus more.FiberStore produce and stock for a full-range of fiber transceiver.Welcome to Fiberstore.com order the fiber optic products.
The XFP transceiver will be the smallest X module, to a certain degree as it removed a lot of electronics, the cost of the transfer towards the host line card. Interestingly, in accordance with the design, XFP supports data rates of telecommunications protocols, that makes it an Ethernet packet routing platforms and SONET / SDH, Resilient Packet Ring (RPR) ideal interface module.
XFP transceivers commercially ready available in the market now include the the SR, LR, ER and ZR.XFP SR working distance is 300 meters max, it really works with OM3 10GB multimode optical fiber. The other 3 types use single mode fiber, XFP LR max distance is 10km, XFP ER is 40km, and XFP ZR max working span is 80km via SMF.
To learn the XFP transceiver,you must learn what's 10G XFP transceiver? 10G XFP transceiver can be a small form factor hot pluggable module made for 10G network applications including 10Gig Ethernet and fiber channel.XFP transceiver is really a high performance, affordable modules for serial optical data communications applications specified for signal rates of 10.30 Gb/s to 11.3 Gb/s. It's fully compliant to XFP MSA Rev 4.5. The modules are prepared for single mode fiber and operates with a nominal wavelength of 850/1310/1550 nm. XFP transceivers modules comply with the XFP multi source agreement put together by several leading companies in this industry.
10G XFP transceivers are made based on based on the multi source agreement (MSA) and has lightweight and most economic prices in comparison with its former 10g transceivers. The transmitter section incorporates uncooled directly modulated 1310 nm distributed feedback laser (DFB) or EML colled laser 1550nm. The receiver section uses PIN photodetector for low dark current and ideal responsivity or APD high sensetivity receiver. Typical 10g XFP on the market include SR, LR, ER, ZR versions.
Fiberstore supply XFP MM 300m, XFP 10km, XFP 20km, XFP 40km, XFP 80km(10GBase-zr xfp 80km), XFP 120km, CWDM XFP, DWDM XFP, WDM XFP, BiDi XFP, single fiber XFP, and number of compatible XFP transceivers for example Cisco XFP, 3Com XFP, Juniper XFP, Foundry XFP, Extreme XFP, Dell XFP, Finisar XFP plus more.FiberStore produce and stock for a full-range of fiber transceiver.Welcome to Fiberstore.com order the fiber optic products.
订阅:
博文 (Atom)