What exactly is XFP transceiver principle ? Fiberstore XFP module is
hot-swappable and protocol-independent. XFP (10 Gigabit Small Form
Factor Pluggable) can be a standard for transceivers for high-speed
computer network and telecommunication links which use optical fiber.
They sometimes operate at near-infrared wavelengths (colors) of 850 nm,
1310 nm or 1550 nm. Principal applications include 10 Gigabit Ethernet,
10 Gbit/s Fibre Channel, Synchronous optical networking (SONET) at
OC-192 rates, Synchronous optical networking STM-64, 10 Gbit/s Optical
Transport Network (OTN) OTU-2, and parallel optics links. They can
operate over a single wavelength or use dense wavelength-division
multiplexing techniques.Juniper XFP is one of the famous xfp transceiver brand.
The XFP transceiver will be the smallest X module, to a certain degree
as it removed a lot of electronics, the cost of the transfer towards the
host line card. Interestingly, in accordance with the design, XFP
supports data rates of telecommunications protocols, that makes it an
Ethernet packet routing platforms and SONET / SDH, Resilient Packet Ring
(RPR) ideal interface module.
XFP transceivers commercially ready available in the market now include
the the SR, LR, ER and ZR.XFP SR working distance is 300 meters max, it
really works with OM3 10GB multimode optical fiber. The other 3 types
use single mode fiber, XFP LR max distance is 10km, XFP ER is 40km, and
XFP ZR max working span is 80km via SMF.
To learn the XFP transceiver,you must learn what's 10G XFP transceiver?
10G XFP transceiver can be a small form factor hot pluggable module made
for 10G network applications including 10Gig Ethernet and fiber
channel.XFP transceiver is really a high performance, affordable modules
for serial optical data communications applications specified for
signal rates of 10.30 Gb/s to 11.3 Gb/s. It's fully compliant to XFP MSA
Rev 4.5. The modules are prepared for single mode fiber and operates
with a nominal wavelength of 850/1310/1550 nm. XFP transceivers modules
comply with the XFP multi source agreement put together by several
leading companies in this industry.
10G XFP transceivers are made based on based on the multi source
agreement (MSA) and has lightweight and most economic prices in
comparison with its former 10g transceivers. The transmitter section
incorporates uncooled directly modulated 1310 nm distributed feedback
laser (DFB) or EML colled laser 1550nm. The receiver section uses PIN
photodetector for low dark current and ideal responsivity or APD high
sensetivity receiver. Typical 10g XFP on the market include SR, LR, ER,
ZR versions.
Fiberstore supply XFP MM 300m, XFP 10km, XFP 20km, XFP 40km, XFP 80km(10GBase-zr xfp 80km),
XFP 120km, CWDM XFP, DWDM XFP, WDM XFP, BiDi XFP, single fiber XFP, and
number of compatible XFP transceivers for example Cisco XFP, 3Com XFP,
Juniper XFP, Foundry XFP, Extreme XFP, Dell XFP, Finisar XFP plus
more.FiberStore produce and stock for a full-range of fiber
transceiver.Welcome to Fiberstore.com order the fiber optic products.
没有评论:
发表评论