What are fiber optic patch cables?
A fiber patchcord
is a cable that connects devices allowing information to pass through
together. Patch cords are a common means of creating wired connections
between devices, such as connecting a tv with a digital cable box using
coaxial cable. These cords can be used for any kind of signal
transference, for example in the television, radio or computer network.
These cables are made with standard fiber optic cabling and are
terminated with fiber optic connectors on both ends.
What are fiber optic cables used for?
There are many application areas for fiber optic patch cables, including
connecting computer work stations to outlets and connecting fiber optic
patch panels or optical cross connect distribution centers.
What are the most common fiber optic patch cables?
There are many common forms of fiber patch cables along with your
network might require a number of these to operate most efficiently.
Professionals use several ways to categorize the most typical fiber
patch cables, including the fiber cable type, the termination connector
types, the optical fiber modes, the dimensions of the fiber cable, as
well as the various types of polishing the connectors. FiberStore offer
different types of common patch cable, it includes 10G OM3/OM4 fiber
patch cable; 9/125 single-mode and OM2 50/125, OM1 62.5/125 multimode
fiber patch cable using a variety of connector types for example LC, SC,
ST, FC,MU and MTRJ.
What will be the fiber patch cables types?
There are the main types of fiber cable: Simplex, Duplex. A Simplex
fiber patch cable has one fiber then one connector on both ends. A
Duplex fiber optic cable features two fibers and a couple connectors on
each end. Either each fiber is going to be marked separately (e.g., A
and B) or perhaps the connector boots will use different colors to
mirror the polarity of every connector.
How are fiber optic patch cables terminated?
You can find basically two methods to terminate a fiber cable: using the
same connector type on ends of the cable (e.g., LC fiber patch cable:
LC to LC) and using two different connectors on each side from the cable
(e.g., ST to SC fiber patch cable) which is also known as the Hybrid termination.
What the most frequent connector types for fiber optic cables?
Typically the most popular connector types are SC, ST, LC, MTRJ, MU and FC.
What modes are used in optical fiber patch cables?
Currently, you will find three different modes that are used in fiber
patch cords: singlemode, multimode, and 10G multimode. Singlemode fiber
cables depend on 9/125 micron fiber cable with singlemode connectors on
each side from the cable. Multimode fiber optic patch cables use
62.5/125 micron or 50/125 micron fiber cabling and so are terminated
with multimode fiber optic connectors on both ends of the cable. 10Gb
multimode fiber optic patch cords use enhanced 50/125 micron fiber which
is optimized for 850nm VCSEL based 10Gb Ethernet. They are usually
compatible with existing network equipment and will offer 300% more
bandwidth than traditional 62.5/125 multimode fibers. These cables may
also be rated for distances as much as 300 meters.
Why exist different connector polishing styles?
Fiber optic connectors are made, manufactured and polished to several
shapes to minimize back reflection. Back reflection grades generally
vary from -30dB to -60dB. Remember that polishing is very important for
applications by which singlemode fiber has been used.
What are some other names for fiber optic patch cables?
This really is certainly not a thorough listing of synonyms for these
cables, but we now have heard them called: fiber optic patch cords,fiber
patch cables, fiber optic jumpers, fiber jumper cables, duplex fiber
jumpers, fiber wire, lan fiber, network fiber, optic cables, network
glass, and more.
What information do I need to provide easily want to change the fiber patch cable?
The following:
1. Quantity, and Length in meters.
2. Variety of fibers.Simplex or Duplex.
3. Connector type on ends, they might not the identical on both ends.
4. Singlemode or Multimode fiber. If Multimode please advise if 62.5/125 or 50/125, or 50/125 laser optimized.
5. PVC or Plenum jacket.
6. You are able to sent your customize detail info to our email:
sales@fiberstore.com, our sales will contact you at the earliest
opportunity, thank you.
没有评论:
发表评论